User manual

Horizontal patrol
Vertical patrol
Reversal
Mirror
Contrast
Brightness
Chroma
Saturation
IR LED switched ON /Auto IR LED Switched OFF
Switched OFF Switched ON
Resolution: CBR Resolution: VBR
PT speed setting: Slow, Medium, Fast
Notice: button can control work mode of IR LED. IR LED may have auto, forced close
two mode, the IR LED will power on or off according to environment light in auto mode; the
IR LED always power off in forced close mode. Some of the buttons above have no
function with this camera model.
Important: If your live view isn’t sharp enough, try to adjust it by turning the black ring in
front of the lens. See chapter 2, figure 2-1, point 5.
Setting device parameters
Click button to enter setting interface, you can set all parameters of the camera
described in chapter 4.2 to 4.6. Only administrator can login to set these parameters.