User manual

Operation Steps:
1) After login the interface of the router, choose “Port Forwarding”;
2) Choose “Add custom Service”;
3) Input IP camera http port;
4) Input IP address of IP camera, click “Apply”.
After finishing the port forwarding, you can use WAN IP address of router and http port of
camera to visit the camera by remote computer as figure 5.
Notice: Because the routers are different, so the interface and setting method of router are
also different, how to do the port forwarding for various routers, please refer to the user
manual of your router or consult with router manufacturer.
4. Operation of Browser
4.1 View video
After installing the plug-in, click “livestream mode (for Internet Explorer),” as Figure 3-4 to
view the video. Your display should look similar to figure 4-1.
Figure 4-1