Technaxx® IP-Security Camera HD 720P TX23+ for indoor use User Manual Important Hint regarding the User Manuals: All languages of the user manual you find on the CD enclosed. The english and german version of the user manuals you also find as printed version enclosed. Before using the device the first time, read the user manual carefully. Wichtiger Hinweis zu den Bedienungsanleitungen: Alle Sprachen der Bedienungsanleitung finden Sie auf der beiliegenden CD.
I Table I TABLE................................................................................................................................2 1. FEATURES ......................................................................................................................4 3. INSTALLATION GUIDE....................................................................................................6 3.1 W IRED CONNECTION TO LAN....................................................................................
6.3 WIFI SETTING ................................................................................................................31 6.4 USER SETTING ...............................................................................................................33 7. TECHNICAL SPECIFICATIONS ....................................................................................34 This device complies with the requirements of the standards referred to the Directive R&TTE 1999/5/EC.
1. Features Video resolution 1280 x 720 HD with 5-25fps Brilliant 1/4" CMOS colour sensor (1 Motion & Sound Detection ~10m 10x IR LED and IR night vision ~10m megapixel) Built-in microphone & speaker Rotatable camera head: 120° vertical & 355° horizontal Supports MicroSD cards up to 64GB Direct Smartphone connection via QR-code / P2P Alarm function (automatic E-mail with picture) H.
Figure 2-2 1 2 3 Antenna Speaker MicroSD card slot 4 5 LAN port (RJ-45) Audio out Figure 2-3 1 2 3 LAN port (RJ-45) Audio out Speaker 4 5 Reset button Power input DC5V/2A
3. Installation Guide 3.1 Wired connection to LAN Power on the IP camera, connect IP camera to router by network cable, meanwhile, connect computer to the same router, example of figure 3-1. Figure 3-1 Router / Modem Network cable IP Camera Insert CD to computer driver, double click on the folder “Search Tools” in the CD and then double click on “IPCameraSearch”. After the software has started, click “Refresh” (bottom left), select the wanted device, double click on the device IP to open browser.
Benutzername Kennwort User Name Password Figure 3-3 After you logged in you will see options like in figure 3-4 below. Figure 3-4 We suggest using Internet Explorer 11 please select “Livestream mode (for Internet Explorer)” as browser to view the video (it can provide more functions), but user needs to install video player before viewing the video. Click “OCX Download ” to download OCX and install it. You can also find it on CD.
3.2 WIFI Setup via WEB Browser You can connect the camera with router by wireless connection, as figure 3-5 shows. To connect the camera via Smartphone directly got to chapter 6.2. Figure 3-5 To set the WIFI connection the camera has to be connected via network cable to the router. To connect the camera via WIFI you need to follow the steps under chapter 3.1 first. After entering the Livestream mode (for Internet Explorer), click on the following icon to enter settings.
3.3 Connecting to WAN You should connect the LAN network to WAN first and do the port forwarding, connect as figure 3-7. Figure 3-7 IP Cam Power Intranet Router Modem (ADSL) Internet Smartphone WAN If visit IP Camera from WAN, you must do port forwarding on the router. Example of figure 3-8.
Operation Steps: 1) After login the interface of the router, choose “Port Forwarding”; 2) Choose “Add custom Service”; 3) Input IP camera http port; 4) Input IP address of IP camera, click “Apply”. After finishing the port forwarding, you can use WAN IP address of router and http port of camera to visit the camera by remote computer as figure 5.
Audio, Talk, Record, Snapshot You can click snapshot functions. Notice: About recording path, click these buttons to perform audio, talk, record and button to enter setting interface. Under Device basic information you can set “Local Recording Path” for saving manual taken snapshots and recordings, as seen in figure 4-2. Figure 4-2 Multipicture change button If you add multiple devices in chapter 4.6.
Horizontal patrol Vertical patrol Reversal Mirror Contrast Brightness Chroma Saturation IR LED switched ON /Auto IR LED Switched OFF Switched OFF Switched ON Resolution: CBR Resolution: VBR PT speed setting: Slow, Medium, Fast Notice: button can control work mode of IR LED. IR LED may have auto, forced close two mode, the IR LED will power on or off according to environment light in auto mode; the IR LED always power off in forced close mode.
4.2 Device basic information 4.2.1 Device information The user can obtain “Device firmware version”,” Web UI version”, “Alias”, “MAC” and etc. You also can change the language here. The UPnP setting of the camera is always activated. 4.2.2 Alias setting The user can name the camera, example for home, office etc. 4.2.
4.2.5 MicroSD Card Record Schedule Here you can see the total capacity of the MicroSD card in MB. Also you can format the MicroSD card. Record coverage can be checked to automatically overwrite the oldest file (loop recording). After checking the Timer recording box you can set the time schedule. By clicking on the schedule the activated part turns blue. Every hour is separated into 4 part of 15 minutes. Figure 4-6 4.2.
4.3 Alarm Settings 4.3.1 Alarm service setting If user need to monitor a fixed area, when there is any motion, it will detect the motion and trigger the alarm. In the motion detect sensibility, the smaller the value, the more sensitivity. After enable the alarm, you can adopt several alarm mode in armed time.
After enabling Motion Detect Armed you can see the following options. Motion Detect Sensibility Set the sensibility fro 1 to 10 (The smaller the value, the more sensitivity.) Alarm Audio Sensibility Choose to get alarmed if noise is detected (low, medium, high or forbid).
4.3.2 Mail Service Setting When alarming is detected, it can send email to your appointed email box, but you need to set email service parameters correctly. Example of figure 4-8, click “Set up” to save these parameters, and then you can click “Test” to check if the setting is successful. To enter the information about SMTP server search your email provider on the internet and choose the right settings to fill in figure 4-8. Our WEB Plug-IN will support you. Figure 4-8 4.3.
4.3.4 Log You can inquire when the device performs alarm in alarm log. Figure 4-10 4.4 Network configuration 4.4.1 Basic network settings The user can also enter the Basic Network Settings to set the IP address except using the search software “IPCameraSearch”. Default setting here is DHCP. See figure 4-11 below. Figure 4-11 Remark: The router connected to camera need to enable DHCP when the user uses “obtain IP from DHCP server”; the routers enable DHCP by default.
4.4.2 Wireless Lan settings Please refer to chapter 3.2. First scan your environment. Then choose your Wireless network. Check the box, select network type, select the authentication of your router and insert the password of the router. Press Set up to save the settings. Figure 4-12 4.4.3 DDNS Service setting User can also use DDNS, such as www.dyndns.com, User must apply a free domain name from this website and fill the info into the below blanks (Figure 4-13) and save the settings.
4.5 PT configuration Signal lamp against pre-bit Call Preset on boot PT Speed Cruise Views Set open /close to turn the Indicator light ON /OFF Check the box to disable the preset function. Select the preset position that the camera should move to after the reboot/ power failure of the camera. Set the speed for the camera movement low, high or fast. Select the amount of cruises from the dropdown menu. The camera will cruise for the selected amount of cruises.
4.6 User and device setting 4.6.1 Multi-device Setting Like Figure 4-17 user can add maximum 9 devices to view video simultaneously. Click “refresh” button to check the device in the LAN. First choose a device on the left, like “The 2nd Device” and click on it. The setting dialogues will popup. Now enter the device info manual (or by clicking on the device you want to be added) fill in user and password. Click “Add” to add device. After that, you must click “Set up” button to save device. Figure 4-17 4.6.
4.6.3 Maintain Figure 4-19 Click “Restore factory settings”, it will pop up a dialog to ask you if restore to factory settings, the camera will restore factory settings and reboot after you confirmed. If there is any issue with the camera you also can reboot the camera by clicking on Reboot Device. There are two types of software in the camera, one is the device firmware, another is Web UI and you can upgrade them respectively.
5. PC software instructions PC software can realize the function of monitoring, setting, viewing the remote records and other functions on the PC. Power on the IP camera, connect IP camera to router by network cable, meanwhile, connect computer to the same router. Startup the computer, open the CD disk on the computer, and choose Security Advanced PC Client from the CD, install the software and run it. After starting the Software the following window will appear, figure 5-1.
Figure 5-2 In the new window that has opened, click “search” on the bottom. See figure 5-3. Figure 5-3 The LAN will be scanned for devices. When a device is found it will be listed. See figure 5-4.
Double click on the device name you want to add. See figure 5-5. Enter password and click “OK”, then finish the camera adding. When it is the first time adding the camera and the password wasn’t modified, no need to enter the password, because the factory default value of the password is empty. Figure 5-5 In the main interface of computer software, click the camera in the list and drag it to a channel on the left.
Click next to the camera name (Figure 5-7), and enter the camera setting list you see in figure 5-8.
Notice: For your own safety please customize the password before you make any further settings. Go to User setting (figure 5-8) and set a customized user and password. For different user class refer to chapter 4.6.2. 6. Mobile phone software (Security Advanced) 6.1 APP download 6.1.1 Android APP download Search the software “Security Advanced” in the Google Play Store, and install it to your Smartphone. Click on the APP icon “Security Advanced” to run it. 6.1.
Figure 6-1 (5) After camera configuration was successful, the APP can search out the camera DeviceID and show it out. Click on the DeviceID in the list and enter the adding camera interface. (if point (5) isn’t shown go back and search camera per LAN) (6) Enter the camera password (7) Click “Done”, then the adding of the camera is finished. Notice: The camera initial password is empty, when first using, no need to enter the password and by clicking “Done” directly the setting will be ok.
Figure 6-2 6.2.2 Scan the QR code on the device Connect the camera to the router through the network cable and plug in the power supply to startup the camera.
Open the APP Security Advanced and operate according to the steps below: Figure 6-4 (1) Open the APP and click “Add device” to enter the adding device interface. (2) Click “Scan QR code” (QR= two dimension) to enter the QR scanning status (Notice: If a pop-up window shows up authorizing the APP to use the mobile phone camera, please select YES.) (3) Aim the Smartphone camera at the QR code on the camera and scan it. (4) Enter the camera password and click “Done”, than the adding of the camera is finished.
(1) Open the APP, and click “Add device” to enter the adding device interface. (2) Click “LAN search” to enter the interface which is searching the camera DeviceID in the LAN. (Notice: The Smartphone and the camera should be connect to the same network) (3) If DeviceID is found, you can directly click on it to add the camera into the list. (4) Enter the camera password (5) Click “Done”, then the adding of the camera is finished.
Figure 6-7 (4) Select WIFI which need to add, and click it. (5) Enter the WIFI password under password. (6) Click “Done”, the WIFI connection setting is finished. Remark: If need help, please click on “About” “Help” in the Security Advanced APP, there is detailed description for each icon. The Android and IOS interface styles are basically the same, both of them can be operated according to this instructions.
6.4 User setting To change the user name /password for Administrator or Operator via your Smartphone follow the steps shown in the figure 6-8 below: (1) Open the APP Security Advanced, click the gear shape icon on the right side to enter the camera setting interface. (2) Click “User setting” to enter the User setting interface. (3) Enter User name and Password (4) Click “Done”, the User setting is finished. Figure 6-8 Remark: Remember or write down the user settings.
7. Technical Specifications Camera Image sensor Signal system Min. illumination Shutter Lens Lens mount Rotation Day/Night Sync mode S/N ratio Compression Video compression Bite rate Audio compression Image Video resolution Frame Rate Image Setting 1/4" 1Megapixel CMOS PAL/NTSC 0.1Lux @ (F1.2,AGC ON), 0 LUX with IR 1/50(1/60)s ~1/100000s f=3.6mm@ F1.2 Horizontal field of view: 62.6° M12 120° vertical, 355° horizontal built-in IR-CUT internal synchronous > 40dB H.
This product includes software developed by third parties, including software which is released under the GNU General Public License Version 2 (GPL v2). This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary.
is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole.
4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5.
countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number.
HOW TO APPLY THESE TERMS TO YOUR NEW PROGRAMS (1) If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. (2) To do so, attach the following notices to the program.
