User manual

65
there is no extra stream, 3G network connection is valid all the time. If the alive time is 0,
then the 3G network connection is valid all the time.
 Dial: Here you can enable or disable 3G network connection/disconnection manually.
 3G wireless network: Here is to display wireless network status, SIM card status, dial status.
If the 3G connection is OK, then you can see the device IP address the wireless network
automatically allocates.
Figure4‐65
4.10.2.5 PPPoE
PPPoE interface is shown as in Figure 4-66.
Input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service provider).
Click save button, you need to restart to activate your configuration.
After rebooting, DVR will connect to internet automatically. The IP in the PPPoE is the DVR
dynamic value. You can access this IP to visit the unit.
Figure4‐66
1
2
3