User manual

142
Parameter Function
Send Email If you enabled this function, System can send out an
email to alert you when an alarm occurs.
Tour You need to check the box here to enable this function.
System begins 1-wiindow or multiple-window tour display
among the channel(s) you set to record when an alarm
occurs.
PTZ Activation Here you can set PTZ movement when alarm occurs.
Such as go to preset X.

5.8.3.2.2 Net Alarm
The network alarm interface is shown as in Figure 5-60.
Network alarm refers to the alarm signal from the network. System does not anti-dither and
sensor type setup. For setup information, refer to chapter 5.8.3.2.1.
Figure5‐60
5.8.3.3 Abnormality
It includes two types: No disk, disk error, disk no space, net disconnection, IP conflict and MAC
conflict. See Figure 5-61 and Figure 5-62.
Figure5‐61
Figure5‐62