User manual

128

5.8.2.8 IP filter
The IP filter interface is shown as in Figure 5-32.
After you enabled trusted sites function, only the IP listed below can access current DVR.
If you enable blocked sites function, the following listed IP addresses can not access current DVR.
Figure5‐32
5.8.2.9 Email
The email interface is shown as in Figure 5-33.
Figure5‐33
Refer to the following sheet for detailed information.
Parameter Function
Enable
Check the box here to enable email function.
SMTP Server
Input server address and then enable this function.
Port Default value is 25. You can modify it if necessary.
Anonymity For the server supports the anonymity function. You can auto