User manual

119
the video or there is IR light or not.)
B/W: The device outputs the black and white video.
Sensor: It is to set when there is peripheral connected IR
light.
5.8.1.3 Encode
5.8.1.3.1 Encode
The encode interface is shown as below. See Figure 5-19.
Figure519
Refer to the following sheet for detailed information.
Parameter Function
Channel Select a channel from the dropdown list.
Video
enable
Check the box here to enable extra stream video. This item is
enabled by default.
Code
stream type
It includes main stream, motion stream and alarm stream. You can
select different encode frame rates form different recorded events.
System supports active control frame function (ACF). It allows you to
record in different frame rates. For example, you can use high frame
rate to record important events, record scheduled event in lower frame
rate and it allows you to set different frame rates for motion detection
record and alarm record.
Compression The main bit stream supports H.264. The extra stream supports
H.264, MJPG.
Resolution
System supports various resolutions, you can select from the
dropdown list. The main stream supports
1080P/720P/960H/D1/HD1/2CIF/CIF/QCIF; the extra stream
supports CIF/QCIF. Note the option may vary due to different
series.
Frame Rate
PAL125f/sNTSC130f/s.