User manual

10
2 Overview and Controls
This section provides information about front panel and rear panel. When you install this series
DVR for the first time, refer to this part first.
2.1 Front Panel
There is no button on the front panel of the Smart Box. There is no need to introduce the
front panel.
2.1.1 Maxi Security Kit PRO FullHD1080P TX-50
The front panel is shown as below. See Figure 2-1.

Figure 2-1
Refer to the following sheet for front panel button information.
SN
Icon Name Function
1
USB port
To connect USB storage device, USB mouse and
etc.
2
Alarm Alarm indicator light
When an alarm occurs, the light becomes red to
alert you.
3
NET
Network abnor
m
indicator light
Network error occurs or there is no net
w
connection, the light becomes red to alert you.
3
HDD
HDD abnor
m
indicator light
HDD error occurs or HDD capacity is below
specified threshold value, the light becomes red
to alert you.
5
IR IR Receiver
It is to receive the signal from the remote
control.
6
ESC ESC
Go to previous menu, or cancel current
operation.
When playback, click it to restore real-time
monitor mode.
7
FN Assist
One-window monitor mode, click this button to
display assistant function: PTZ control and image
color.
Backspace function: in numeral control or text
control, press it for 1.5seconds to delete the
previous character before the cursor.
In motion detection setup, working with Fn and
direction keys to realize setup.
In text mode, click it to switch between numeral,
English character(small/capitalized) and etc.