User manual

4.10.5.2.2 Tour

Here you can activate tour function. Click Setup button, you can see an interface shown as in

Figure 4-123

 Enable tour: Highlight box here to enable this function.

 Interval: System supports 1/8-window tour. Input proper interval value here. The value

ranges from 5-120 seconds. It is for schedule tour/alarm/motion detect tour.

 Split: You can select window split mode from the dropdown list.

 Channel group: It is to display all channel groups on current split mode. You can edit and

delete a channel group here. Double click an item in the list; you can edit its channel group

setup. Right now system max supports 32.

 Add: Under specified window split mode, click it to add channel group.

 Delete: Click it to remove selected channel group.

 Move up: Click it to move current selected channel up.

 Move down: Click it to move current selected channel down.

 Default: Click it to restore default setup.

Tips:

 Use mouse or Shift button to switch

and button to enable /disable tour. means the

tour funciton is enabled and

meas tour funciton is disabled.

 On the navigation bar, click

or to enable/disable tour function.

Figure4‐123

4.10.5.2.3 Zero-channel Encoding

Click zero-channel encoding button, you can go to the following interface. See Figure 4-124.Here

you can enable and set zero-channel encoding function so that you can view several video

sources at one channel.

 Enable: This function is disabled by default. Check the box here to enable this function so

that you can control the zero-channel encoding function at the WEB.

 Compression: System default setup is H.264. You can set according to device capability.

 Resolution: The resolution value may vary due to different device capabilities. Select from

the dropdown list.

 Frame rate: The frame rate value may vary due to different device capabilities. Select from

the dropdown list.

 Bit Rate: The bit rate value may vary due to different device capabilities and frame rate

setups. Select from the dropdown list.

 Save: Click the Save button to save current setup. If this function is disabled, you can not

operate zero-channel encoding function at the WEB, the video is black or null even you

operate when the function is disabled. After you enabled this function, login the Web and you