User manual
98
Figure4‐121
4.10.5.2 Display
It is to set display, TV adjust, tour, zero-channel encode, and preview favorites information.
4.10.5.2.1 Display
Display setup interface is shown as below. See Figure 4-122.
Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
Channel name: Here is for you to modify channel name. System max support 25-digit (The
value may vary due to different series). Note all your modification here only applies to DVR
local end. You need to open web or client end to refresh channel name.
Time display: You can select to display time or not when system is playback.
Channel display: You can select to channel name or not when system is playback.
Resolution: There are four options: 1920×1080, 1280×1024(default),1280×720,1024×768.
Note the system needs to reboot to activate current setup.
Image enhance: Check the box; you can optimize the margin of the preview video.
Preview denoise: It is to reduce the video noise and make it clearer. You can set denoise
level. The higher the level is, the clearer the video is.
Highlight icon
to select the corresponding function.
After completing all the setups click save button, system goes back to the previous menu.
Figure4‐122