User manual

84
4.10.3.3 Abnormality
There are two types: HDD/Network.
 HDD: HDD error, no disk, no space. See Figure 4-95 and Figure 4-96.
 Network: Disconnection, IP conflict, MAC conflict. See Figure 4-97.
 Alarm output: Select alarm activation output port (multiple choices).
 Less than: System can alarm you when the HDD space is less than the threshold you set
here (For HDD no space type only).
 Latch: Here you can set corresponding delaying time. The value ranges from 1s-300s.
System automatically delays specified seconds in turning off alarm and activated output after
external alarm cancelled.
 Show message: system can pop up the message in the local screen to alert you when
alarm occurs.
 Alarm upload: System can upload the alarm signal to the network (including alarm centre)
if you enabled current function. For disconnection event, IP conflict event and MAC
conflict event, this function is null.
 Send email: System can send out email to alert you when alarm occurs.
 Buzzer: Highlight the icon to enable this function. The buzzer beeps when an alarm occurs.
Figure4‐95
Figure4‐96