User manual

63
 HTTPS port: Default value is 443.
 RTSP port: Default value is 554.
Important: System needs to reboot after you changed and saved any setup of the above
four ports. Make sure the port values here do not conflict.
Figure4‐63
4.10.2.3 WIFI
The WIFI interface is shown as below. See Figure 4-64.
 Auto reconnecting WIFI: Check the box here, system automatically connects to the previous
WIFI hotspot.
 Refresh: You can click it to search the hotspot list again. It can automatically add the
information such as the password if you have set it before.
 Disconnect: Here you can click it to turn off the connection.
 Connect: Here you can click it to connect to the hotspot. System needs to turn off current
connection and then connect to a new hotspot if there is connection of you selected one.
Figure4‐64