User manual
145
Figure5‐66
5.8.4.3 Record
The interface is shown as in Figure 5-67.
Figure5‐67
Refer to the following sheet for detailed information.
Parameter Function
Channel
Here you can view channel number.
The number displayed here is the max channel amount of your device.
Status There are three statuses: schedule, manual and stop.
Schedule
System enables auto record function as you set in record schedule setup
(general, motion detect and alarm).
Manual
It has the highest priority. Enable corresponding channel to record no matter
what period applied in the record setup.
Stop
Stop current channel record no matter what period applied in the record
setup.
Start all/
stop all
Check the corresponding All button, you can enable or disable all channels
record.