User manual

142
Figure5‐60
5.8.3.3 Abnormality
It includes two types: No disk, disk error, disk no space, net disconnection, IP conflict and MAC
conflict. See Figure 5-61 and Figure 5-62.
Figure5‐61
Figure5‐62
Refer to the following sheet for detailed information.
Parameter Function
Event
Type
The abnormal events include: No disk, disk error, disk no space, net
disconnection, IP conflict and MAC conflict.
You can set one or more items here.
Less than: You can set the minimum percentage value here (For disk
not space only). The device can alarm when capacity is not sufficient.
You need to draw a circle to enable this function.
Enable Check the box here to enable selected function.
Alarm Out Select corresponding alarm output channel when an alarm occurs. You
need to check the box to enable this function.
Latch The alarm output can delay for the specified time after an alarm stops.
The value ranges from 1s to 300s.