User manual

129
Parameter Function
Update period
(interval)
This function allows the system to send out the test email to
check the connection is OK or not. Check the box to enable
this function and then set the corresponding interval. System
can send out the email regularly as you set here.
Email test
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, save the email
setup information.
5.8.2.10 FTP
The FTP interface is shown as in Figure 5-34.
It is to set FTP IP, port and etc for remote storage.
Refer to chapter 4.10.2.9 for detailed information.
Figure5‐34
5.8.2.11 UPnP
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. See Figure 5-35.
 In the Windows OS, From Start->Control Panel->Add or remove programs. Click the
“Add/Remove Windows Components” and then select the “Network Services” from the
Windows Components Wizard.
 Click the Details button and then check the “Internet Gateway Device Discovery and Control
client” and “UPnP User Interface”. Click OK to begin installation.
 Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the DVR can auto
detect it via the “My Network Places”