User manual

128
Figure5‐33
Refer to the following sheet for detailed information.
Parameter Function
Enable
Check the box here to enable email function.
SMTP Server
Input server address and then enable this function.
Port Default value is 25. You can modify it if necessary.
Anonymity For the server supports the anonymity function. You can auto
login anonymously. You do not need to input the user name.
Password and the sender information.
User Name
The user name of the sender email account.
Password
The password of sender email account.
Sender
Sender email address.
Authentication
(Encryption
mode)
You can select SSL or none.
Subject
Input email subject here.
Attachment
System can send out the email of the snapshot picture once
you check the box here.
Receiver
Input receiver email address here. Max three addresses.
It supports SSL, TLS email box.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means there
is no interval. Note system will not send out the email
immediately when the alarm occurs. When the alarm, motion
detection or the abnormity event activates the email, system
sends out the email according to the interval you specified here.
This function is very useful when there are too many emails
activated by the abnormity events, which may result in heavy
load for the email server.
Health mail
enable
Check the box here to enable this function.