User manual

116
Parameter Function
Manual
Add
Click it, the interface is shown as in Figure 5-16. Here you can add
network camera manually.
You can select a channel from the dropdown list (Here only shows
disconnection channel.)
Note:
 System supports manufactures such as Panasonic, Sony,
Dynacolor, Samsung, AXIS, Arecont, Dahua and Onvif standard
protocol.
 If you do not input IP address here. System uses default IP
192.168.0.0 and system does not connect to this IP.
 Can not add two devices at the same time. Click OK button
here, system only connect to the corresponding device of
current channel.
5.8.1.2 Conditions
Here you can view device property information. The setups become valid immediately after you
set. See Figure 5-17 (analog channel) and Figure 5-18 (digital channel).
Figure5‐17
Figure5‐18
Refer to the following sheet for detailed information.
Parameter Function
Channel Select a channel from the dropdown list.