User manual

110
Figure5‐6
 Section 4: Instant record button. Click it, the button becomes yellow and system begins
manual record. See Figure 5-7. Click it again, system restores previous record mode.
Figure5‐7
 Section 5: Local play button.
The Web can playback the saved (Extension name is dav) files in the PC-end.
Click local play button, system pops up the following interface for you to select local play file. See
Figure 5-8.
Figure5‐8
 Section 6: From the left to the right ,you can see video quality/fluency/ full screen/1-
window/4-window/6-window/8-window/9-window/13-window/16-window/20-window/25-
window/36-window.. You can set video fluency and real-time feature priority.
 Section 7: PTZ operation panel. Refer to chapter 5.5 for detailed information.
 Section 8: Image setup and alarm setup. Refer to chapter 5.6 for detailed information.
 Section 9：From left to right, it is to set video quality, video latency, full screen, 1-window, 4-
window.
 Section 10：Zero-channel encoding. This function allows you to view several-channel in one
window. It supports 1/4-channel mode. Go to chapter 4.10.5.2.3 to enable zero-channel
encoding function first.
5.4 Live
In section 2, left click the channel name you want to view, you can see the corresponding video
in current window.
On the top left corner, you can view device IP (10.15.6.144), channel number (1), network
monitor bit stream (61Kbps) and stream type: M (Main stream)/S (Sub stream). See Figure 5-9.