User manual

100
can select zero-channel encoding mode at the right corner of the
interface
. Select a mode; you can view the local preview video.
Figure4‐124
4.10.5.2.4 Favorites
It is for you to set and save favorites preview setup. You can select different window display
modes and then select corresponding channel(s). Note for one mode, one channel can only be
selected once. See Figure 4-125.
 Set channels: Click it you get channel setup information of current preview interface. For
example. If you window split mode is 4 and channel setup includes channel 1/2/3/4, you can
see 4 from the split dropdown list and then see channel 1/2/3/4 at the middle of the interface.
 Get channels: Click it to activate current setup. You can see current setup effect on the
screen right now.
 Default: it is to restore factory default setup. For example, 1-window mode, it is to display
channel 1 and 4-window mode, it is display channel 1/2/3/4.
 Save: Click it to save current setup to Favorites folder. Otherwise, you can not find current
setup in the Favorites.
Figure4‐125
On the navigation bar, you can see the Favorites shortcut menu. You can select from the
dropdown list. Click View 1, you can see the channel(s) you saved on the Favorites folder. See
Figure 4-126.