User manual

95
4.10.4.3 Record
4.10.4.3.1 Record Control
Caution:
You need to have proper rights to implement the following operations. Make sure the HDD
has been properly installed.
There are three ways for you to go to manual record menu.
 Right click mouse and then select Manual->Record.
 In the main menu, from Setting->Storage->Record.
 In live viewing mode, click record button in the front panel or record button in the remote
control.
System supports main stream and sub stream. There are three statuses:
schedule/manual/stop. See Figure 4-112. Highlight icon “○” to select corresponding
channel.
 Manual: The highest priority. After manual setup, all selected channels will begin ordinary
recording.
 Schedule: Channel records as you have set in recording setup (Main Menu->Setting-
>System->>Schedule)
 Stop: Current channel stops recording.
 All: Check All button after the corresponding status to enable/disable all-channel
schedule/manual record or enable/disable all channels to stop record.
Figure4‐112