User manual

89
 Record Type: Check the box to select corresponding record type. There are four types:
Regular/MD (motion detect)/Alarm/MD&Alarm.
 Week day: There are eight options: ranges from Saturday to Sunday and all.
 Holiday: It is to set holiday setup. Note you need to go to the General interface (Main Menu-
>System->General) to add holiday first. Otherwise you can not see this item.
 Pre-record: System can pre-record the video before the event occurs into the file. The value
ranges from 1 to 30 seconds depending on the bit stream.
 Redundancy: System supports redundancy backup function. You can highlight Redundancy
button to activate this function. Note, before enable this function, set at least one HDD as
redundant. (Main menu->Setting->Storage->HDD Manager). Note this function is null if
there is only one HDD.
 Period setup: Click button
after one date or a holiday, you can see an interface shown
as in Figure 4-103.There are four record types: regular, motion detection (MD), Alarm, MD &
alarm.
Following the steps listed below to draw the period manually.
 Select a channel you want to set. See Figure 4-99.
Figure 4-99
 Set record type. See Figure 4-100.
Figure 4-100
 Draw manually to set record period. There are six periods in one day. See Figure 4-101.
Figure 4-101
Highlight icon to select the corresponding function. After completing all the setups click save
button, system goes back to the previous menu. There are color bars for your reference. Green
color stands for regular recording, yellow color stands for motion detection and red color stands
for alarm recording. The white means the MD and alarm record is valid. Once you have set to
record when the MD and alarm occurs, system will not record neither motion detect occurs nor
the alarm occurs.