User manual

4.10.3.4 Alarm Output

Here is for you to set proper alarm output such as schedule, manual.

Highlight icon

to select the corresponding alarm output.

After all the setups click OK button, system goes back to the previous menu. See Figure 4-98.

Figure 4-98



4.10.4 Storage

It is to set HDD management, storage parameters, set record plan and record control.

4.10.4.1 Schedule

It is for you to set record plan and snapshot plan.

4.10.4.1.1 Record

Note: You need to have proper rights to implement the following operations. Make sure the

HDDs have been properly installed.

After the system booted up, it is in default 24-hour regular mode. You can set record type and

time in schedule interface.

In the main menu, from Setting->Storage->Schedule, you can go to schedule menu. See

Figure 4-102.

Note you need to go to main menu->Setting->System->General->Holiday to set holiday

date first, otherwise, there is no holiday setup item.

 Channel: Select the channel number first. You can select “all” if you want to set for the whole

channels.



: Sync connection icon. Select icon of several dates, all checked items can be

edited together. Now the icon is shown as

 : Click it to delete a record type from one period.