User manual

Figure4‐78

2) The proxy server software developed from the SDK. Open the software and input the global

setup. The auto connection port MUST be the same as the port you set in the previous step.

3) Now you can add device. Do not input default port number such as the TCP port in the

mapping port number. The device ID here shall be the same with the ID you input in Figure 4-78.

Click Add button to complete the setup.

4) Now you can boot up the proxy server. When you see the network status is Y, it means your

registration is OK. You can view the proxy server when the device is online.

Important : The server IP address can also be domain. But you need to register a domain name

before you run proxy device server.

4.10.2.14 Alarm Centre :

This interface is reserved for you to develop. See Figure 4-79.

Figure4‐79