User manual

67
4.10.2.5 PPPoE: PPPoE interface is shown as in Figure 4-66.
Input “PPPoE name” and “PPPoE password” you get from your ISP (Internet service provider).
Click save button, you need to restart to activate your configuration. After rebooting, DVR will
connect to internet automatically. The IP in the PPPoE is the DVR dynamic value. You can
access this IP to visit the unit.
Figure4‐66
4.10.2.6 DDNS Setup : DDNS setup interface is shown as in Figure 4-67.
You need a PC of fixed IP in the internet and there is the DDNS software running in this PC. In
other words, this PC is a DNS (domain name server). In network DDNS, select DDNS type and
highlight enable item. Then input your PPPoE name you get from you IPS and server IP (PC with
DDNS). Click save button and then reboot system. Click save button, system prompts for
rebooting to get all setup activated. After rebooting, open IE and input as below:
http：//(DDNS server IP)/(virtual directory name)/webtest.htm
e.g.: http：//10.6.2.85/DVR _DDNS/webtest.htm.) Now you can open DDNSServer web search
page.
Figure4‐67