User manual

36
Item Note
Period There are two periods in one day. You can set different sharpness,
brightness, and contrast setup for different periods.
Effective Time Check the box here to enable this function and then set period time.
Sharpness
The value here is to adjust the edge of the video. The value ranges from
0 to 100. The larger the value is, the clear the edge is and vice versa.
Note there is noise if the value here is too high. The default value is 50
and the recommended value ranges from 40 to 60.
Brightness
It is to adjust monitor window bright. The value ranges from 0 to 100. The
default value is 50.
The larger the number, the bright the video is. When you input the value
here, the bright section and the dark section of the video will be adjusted
accordingly. You can use this function when the whole video is too dark
or too bright. Note the video may become hazy if the value is too high.
The recommended value ranges from 40 to 60.
Contrast
It is to adjust monitor window contrast. The value ranges from 0 to 100.
The default value is 50.
The larger the number, the higher the contrast is. You can use this
function when the whole video bright is OK but the contrast is not proper.
Note the video may become hazy if the value is too low. If this value is
too high, the dark section may lack brightness while the bright section
may over exposure .The recommended value ranges from 40 to 60.
Saturation
It is to adjust monitor window saturation. The value ranges from 0 to 100.
The default value is 50.
The larger the number, the strong the color is. This value has no effect
on the general brightness of the whole video. The video color may
become too strong if the value is too high. For the grey part of the video,
the distortion may occur if the white balance is not accurate. Note the
video may not be attractive if the value is too low. The recommended
value ranges from 40 to 60.
Color mode It includes several modes such as standard, color, bright, gentle. Select
a color mode, the sharpness, brightness, contrast and etc can
automatically switch to corresponding setup.
EQ Click reset button, device can automatically adjust to the best display
effect.
Position It is to adjust the image position on the screen.
Customized Click it to set customized color mode.

