User manual

Note the above interface may vary due to different protocols. The button is grey and can not

be selected once the current function is null. Right click mouse or click the ESC button at the

front panel to go back to the Figure 4-13.

Icon Function Icon Function

Preset Flip

Tour Reset

Pattern Aux

Scan Aux on-off

button

Rotate Go to menu

4.4.2.1 PTZ Function Setup

Click , you can go to the following interface to set preset, tour, pattern, and scan. See

Figure 4-16.

Figure4‐16

Preset Setup

In Figure 4-16, click preset button and use eight direction arrows to adjust camera to the proper

position. The interface is shown as in Figure 4-17.

Click Set button and then input preset number. Click Set button to save current preset.