User manual

158
5.8.5.8 Default
The default setup interface is shown as in Figure 5-85.
Here you can select Channel / Network / Event / Storage / System. Or you can check the All box
to select all items.
Figure5‐85
5.8.5.9 Upgrade
The upgrade interface is shown as in Figure 5-86.
Select the upgrade file and then click the update button to begin update. Note the file name shall
be as *.bin. During the upgrade process, do not unplug the power cable, network cable, or
shutdown the device.
Important: Improper upgrade program may result in device malfunction!
Figure5‐86
5.8.6 Info
5.8.6.1 Version
The version interface is shown as in Figure 5-87.
Here you can view record channel, alarm input/output information, software version, release date
and etc. Note the following information is for reference only.
Figure5‐87




