User manual

151
Refer to the following sheet for detailed information.
Parameter Function
Resolution
There are four options:
1920×1080,1280×1024(default),1280×720,1024×768. Note the system
needs to reboot to activate current setup.
Transparency
Here is for you to adjust transparency. The value ranges from 128 to 255.
Time
title/channel title
Check the box here, you can view system time and channel number on the
monitor video.
Image enhance
Check the box; you can optimize the margin of the preview video.

5.8.5.2.2 Tour
The tour interface is shown as in Figure 5-72. Here you can set tour interval, split mode, motion
detect tour and alarm tour mode.
Figure5‐72
Refer to the following sheet for detailed information.
Parameter Function
Enable tour
Check the box here to enable tour function.
Interval
Here is for you to adjust transparency. The value ranges from 5 to 120s.
The default setup is 5s.
Split
Here you can set window mode and channel group. System can support
1/4/8-window according to device channel amount.
Motion tour/
Alarm tour
Here you can set motion detect tour/alarm tour window mode. System
supports 1/8-window now.

