User manual

147
Figure5‐64
Figure5‐65
Refer to the following sheet for detailed information.
Parameter Function
Channel Select a channel from the dropdown list.
Pre-record Input pre-record time here. The value ranges from 0 to 30.
Redundancy Check the box here to enable redundancy function. Note this function is
null if there is only one HDD.
Snapshot Check the box here to enable snapshot function.
Holiday Check the box here to enable holiday function.
Setup (Sunday
to Saturday)
Click the Setup button, you can set record period. See Figure 5-64. There
are six periods in one day. If you do not check the date at the bottom of
the interface, current setup is for today only.
Click Save button and then exit.
Setup (Holiday) Click the Setup button, you can set record period. See Figure 5-64. There
are six periods in one day. If you check Holiday box, current channel shall
record as your holiday setup here.
Copy
Copy function allows you to copy one channel setup to another. After
setting in channel, click Copy button, you can go to interface Figure 5-65.
You can see current channel name is grey such as channel 1. Now you
can select the channel you wan to paste such as channel 5/6/7. If you wan
to save current setup of channel 1 to all channels, you can click the first
box “ALL”. Click the OK button to save current copy setup. Click the OK
button in the Encode interface, the copy function succeeded.