User manual

133
5.8.2.10 FTP
The FTP interface is shown as in Figure 5-34.
It is to set FTP IP, port and etc for remote storage.
Refer to chapter 4.10.2.9 for detailed information.
Figure5‐34
5.8.2.11 UPnP
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. See Figure 5-35.
 In the Windows OS, From Start->Control Panel->Add or remove programs. Click the
“Add/Remove Windows Components” and then select the “Network Services” from the
Windows Components Wizard.
 Click the Details button and then check the “Internet Gateway Device Discovery and Control
client” and “UPnP User Interface”. Click OK to begin installation.
 Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the DVR can auto
detect it via the “My Network Places”

Figure5‐35