User manual

126
5.8.1.4 Channel Name
Here you can set channel name. See Figure 5-23.
Figure5‐23
5.8.2 Network
5.8.2.1 TCP/IP
The TCP/IP interface is shown as in Figure 5-24.
Figure5‐24
Refer to the following sheet for detailed information.
Parameter Function
Mode There are two modes: static mode and the DHCP mode.
 The IP/submask/gateway are null when you select the DHCP mode to
auto search the IP.
 If you select the static mode, you need to set the IP/submask/gateway
manually.
 If you select the DHCP mode, you can view the IP/submask/gateway
from the DHCP.
 If you switch from the DHCP mode to the static mode, you need to
reset the IP parameters.
 Besides, IP/submask/gateway and DHCP are read-only when the
PPPoE dial is OK.
Mac Address It is to display host Mac address.
IP Version It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
IP Address Use the keyboard to input the corresponding number to modify the IP
address and then set the corresponding subnet mask and the default
gateway.
Preferred DNS DNS IP address.