User manual

106

Without the protocol: For the ATM/POS without the protocol, the interface is shown as in Figure

4-130. Source IP refers to host IP address that sends out information (usually it is the device

host.)

Destination IP refers to other systems that receive information. Usually you do not need to set

source port and target port. There are total four groups IP. The record channel applies to one

group (optional) only. Six frame ID groups verification can guarantee information validity and legal.

Figure4‐130

4.10.5.5 Account

Here is for you to implement account management. See Figure 4-131 and 4-132.

Here you can:

 Add new user

 Modify user

 Add group

 Modify group

 Modify password.

For account management note:

 For the user account name and the user group, the string max length is 6-byte. The

backspace in front of or at the back of the string is invalid. There can be backspace in the

middle. The string includes the valid character, letter, number, underline, subtraction sign,

and dot.

 The default user amount is 64 and the default group amount is 20. System account adopts

two-level management: group and user. No limit to group or user amount.

 For group or user management, there are two levels: admin and user.

 The user name and group name can consist of eight bytes. One name can only be used

once. There are four default users: admin/888888/666666 and hidden user “default”. Except

user 6666, other users have administrator right.

 Hidden user “default” is for system interior use only and can not be deleted. When there is no

for this user so that you can view some channel view without login.

 One user should belong to one group. User right can not exceed group right.

 About reusable function: this function allows multiple users use the same account to login.