User manual

100
4.10.5.1.2 Date and Time
The interface is shown as in Figure 4-119.
 Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-YYYY.
 Date separator: There are three denotations to separate date: dot, beeline and solidus.
 DST: Here you can set DST time and date. Here you can set start time and end time by
setting corresponding week setup or by setting corresponding date setup.
 NTP: It is to set NTP server information.
Figure4‐119
4.10.5.1.3 Holiday
Holiday setup interface is shown as in Figure 4-120. Click Add new holiday button, you can input
new holiday information. See Figure 4-121. Here you can set holiday name, repeat mode and
start/end time.
Note
 When you enable Holiday settings and schedule setup at the same time, holiday setting has
the priority. If the selected day is a holiday, then system records as you set in holiday setting.
If it is not a holiday, system records as you set in Schedule interface. Note
 Note, there is no year setup on the holiday setup. For example, if you set 30th Oct, 2012 as
a holiday, then the date of 30th Oct in each year will be set as a holiday.