Operation Manual
Table Of Contents
- Antenna and Tower Recommendations (if applicable)
- The fans internal to the enclosures help cool the components. The specific fan voltages and part numbers are listed in the Block Diagram included with the Quickstart package.
- Unpacking and Inspection
- FM Amplifier Pallets
- The following is a summary of the typical FM amplifier pallets used in Technalogix power amplifiers and transmitters out of the many pallets that have been designed for production or custom applications. The exact bias and drain currents of your syste...
- PB1A-50-1000-1042H
1
Safeguards
2
Terms and
Warranty
3
Principle of
Operation
4
Installation
5
Operation
6
Control System
7
RF Components
7
RF Components
9
Maintenance
10
Troubleshooting
The Control section of the web interface screen allows the user to control
functions inside the equipment, including:
• Turn Carrier On/Off - Turn the Carrier on/off
• AGC - Increase the Carrier by removing attenuation (steps of 1
or 10 dB)
• VSWR ↑↓ - Increase or Decrease the VSWR Trip point by 0.1
between 1.1:1 and factory determined limit.
• Frequency ↑↓ - Increase or Decrease the FM carrier frequency
(MHz)
• Analog/Digital – Toggle between analog or digital audio inputs
• Mono/Stereo – Toggle between mono or stereo
• Pre-Emphasis – Toggle between no added emphasis, or 25, 50,
or 75 us emphasis
• Reset - Forces the system to reboot