Operation Manual
Table Of Contents
- Antenna and Tower Recommendations (if applicable)
- The fans internal to the enclosures help cool the components. The specific fan voltages and part numbers are listed in the Block Diagram included with the Quickstart package.
- Unpacking and Inspection
- FM Amplifier Pallets
- The following is a summary of the typical FM amplifier pallets used in Technalogix power amplifiers and transmitters out of the many pallets that have been designed for production or custom applications. The exact bias and drain currents of your syste...
- PB1A-50-1000-1042H
1
Safeguards
2
Terms and
Warranty
3
Principle of
Operation
4
Installation
5
Operation
6
Control System
7
RF Components
7
RF Components
9
Maintenance
10
Troubleshooting
2. Open web browser for monitor and control
The default internal address is http://adrenaline/index.htm. Type this default
internal address into the URL address bar of your favorite web browser. The
web pages cannot be accessed until you have established basic
communication with the power amplifier or transmitter (turned on).
2.1 Web Page Password Protection
After entering the above internal address into a web browser, you will be
asked for a password. Initially, please use the following:
username: admin
password: admin
The password can later be changed (see Optimize User Parameter section).
2.2 Main Page Description
After entering the login information, the main page is then shown on the
browser, as illustrated below for either single amplifier systems or multiple
amplifier systems that are combined: