User's Manual

TM-200 Issue 1.02 November 2005 Page 6 of 64
Available Options
• 4.5 MHz sub carrier and baseband audio inputs.
• Dual RS-232 control with daisy chain capabilities that allow for remote control by
PC workstation.
• HRC Output Frequency Set - This feature is controlled by an internal dip switch
assembly, DS-1. The switch is located near the right front corner (with the panel
facing you) between the test point and the output converter module. DS-1 is
clearly marked on the PCB. Switch #3 placed in the OFF position switches the
output frequency to HRC on all channels. The switch is normally set to ON at the
factory.