User's Manual

TM-200 Issue 1.02 November 2005 Page 2 of 64

1.0

AFEGUARDS

General Safeguards

This section is written as a general guide for those having previous knowledge and

experience with these kinds of equipment. It is not intended to contain a complete

statement of all safety precautions, which should be observed by personnel using this or

other electronic equipment.

To reduce the risk of fire or electric shock, do not expose this equipment to rain or

moisture. Do not open the cabinet. Refer servicing to qualified personnel.

1. READ INSTRUCTIONS - All safety, installation, and operating instructions should be

read before the equipment is operated.

2. RETAIN INSTRUCTIONS - The safety and operating instructions should be retained

for future reference.

3. FOLLOW INSTRUCTIONS - All safety, installation, and operating instructions should

be followed.

4. GROUNDING AND POLARIZATION - The TM-200 Modulator is equipped with a

three prong grounded power plug. Do not remove the ground prong from the plug.

Do not use an AC receptacle where the plug blades cannot be fully inserted.

5. SERVICING - Do not attempt to service this equipment yourself as opening or

removing covers may expose you to dangerous voltage or other hazards and will

void the warranty. Refer all servicing to qualified service personnel.

6. DAMAGE REQUIRING SERVICE - Unplug this equipment and refer servicing to

qualified service personnel under the following conditions:

• if the power cord or plug is damaged.

• if liquid has been spilled or objects have fallen into the equipment.

• if the equipment has been exposed to rain or water.

• if the equipment does not operate normally by following the operating

instructions. Adjust only those controls covered by the operating instructions. An

improper adjustment may result in damage and will often require extensive work

by a qualified technician to restore the equipment to its normal operation.

• if the equipment has been dropped or the cabinet has been damaged.

• if the equipment exhibits a distinct change in performance.