User's Manual

TM-200 Issue 1.02 November 2005 Page 26 of 64
Automatic Shut Down
Technalogix power supplies are designed so that under certain power line or heat
buildup conditions, the unit shuts off. An indicator would be no RF output, but the
POWER LED remains on. If this occurs, unplug the power cord and wait two minutes
before re-powering. Upon applying power, you should again have RF output. If not, or
should the unit return to shutdown mode, please contact Technalogix for assistance.
Technalogix highly recommends a 1.75 inch air circulation space between any rack
mounted equipment.