User's Manual

TM-200 Issue 1.02 November 2005 Page 21 of 64
Setup of Video Input Connection and Adjustment
1. Connect a 1.0V
P-P
video source to the VIDEO IN jack on the rear panel.
2. Adjust the front panel VIDEO MODULATION control for 87.5% modulation.
• Set the front panel DISPLAY SELECT switch to VIDEO (down)
position;
• Observe front panel LED bar graph behind front panel display readout
window.
• First RED LED will begin illumination at approximately 87.5%
modulation; or
• Observe TV monitor for good visual image.