User's Manual

TM-200 Issue 1.02 November 2005 Page 19 of 64

5.0

PERATING

ROCEDURE

Preliminary Hook-up

1. Terminate modulator into a 50 ohm load before applying power.

2. Connect the power cord of the Technalogix TM-200 agile modulator to a proper

electrical source as indicated on the back of the unit.

3. Observe the front panel. If power is applied and present, the red power LED will

illuminate. Also, all the elements of the displays behind the display readout

window will illuminate momentarily as a display test.

4. Observe the numbers displayed behind the display readout window after the test.

They will indicate:

• Microprocessor software version;

• Internal option dipswitch settings;

• RS-232 unit ID (if so equipped); and

• Last tuned channel.

5. After a moment, the Lock Detect LED will illuminate.