User's Manual

TM-200 Issue 1.02 November 2005 Page 17 of 64
Location and Function of Controls and Connectors
The following illustrations depict the location of the installation connectors when
installing the power amplifier with a modulator or processor.
FRONT
BACK
Audio Deviation – Allows user to control extent of audio deviation. Original factory
setting at 25 KHz deviation using standard pre-emphasis curve.
Audio/Video Display Select - Provides a graphical representation of audio deviation and
visual modulation levels on an LED bar graph. The switch selects between audio
deviation or visual modulation.
Video Modulation -- Allows user to control extent of video modulation. Original factory
setting at 87.5% video modulation with 1.0 Volt peak to peak baseband input video
signal.
Frequency Offset Select – Toggles between +10 KHz, 0KHz, and –10 KHz frequency
offset.