User Manual

Technalogix Ltd. TM-100 Modulator

Unpacking and Inspection

Check the outside of the container. Carefully open the container and remove the

modulator. Retain all packing material that can be reassembled in the event that

the equipment must be returned to the factory.

Exercise care in handling equipment during inspection to prevent

damage due to rough or careless handling.

Visually inspect the enclosure of the modulator for damage that may have

occurred during shipment. Check for evidence of water damage, bent or warped

chassis, loose screws or nuts, or extraneous packing material in connectors.

Inspect all connectors for bent connector pins. If the equipment is damaged, a

claim should be filed with the carrier once the extent of the damage is assessed.

Technalogix cannot stress too strongly the importance of immediate careful

inspection of the equipment and subsequent immediate filing of the necessary

claims against the carrier if necessary. If possible, inspect the equipment in the

presence of the delivery person. If the equipment is damaged, the carrier is your

first area of recourse. If the equipment is damaged and must be returned to the

factory, phone for a return authorization. Claims for loss or damage may not be

withheld from any payment to Technalogix, nor may any payment due be

withheld pending the outcome thereof. Technalogix cannot guarantee the

carrier’s performance.