User's Manual

800S-P Series Switch Power Supplies
♦ Universal AC Input
♦ 0.98 Typical Power Factor
♦ Forced Current Sharing at Parallel Operation
♦ Power Failure Signal
♦ Remote Sense
♦ Remote ON / OFF control
♦ SC / OV / OL / OT Protection
♦ Programmable Output Voltage
Specification
Model
800S -P009 800S-P012 800S-P015 800S-P018
Input Voltage Range 90 ~ 260V AC, 47~63 Hz ( 90~170VAC reduce power see curve below )
Input Current (Typ.) 4.5A / 230 V AC
Inrush Current (Typ.)
RESULT A：42.0A
Power Factor (Typ.) 0.98
Efficiency 83% 84% 85% 85%
DC Output Voltage +9V DC +12V DC +15V DC +18V DC
Output Voltage Adjustment
Max.-Min.＞15% Adj. Typical adjustment by potentiometer
25% ~ 100% Adjustment by 1 ~ 5v DC external control
Ripple & Noise
1%
Line & Load Regulation Less than 1%
Output Rated Current 88.8A 66.6A 53.3A 44.4A
Max Output Power 800W
Over Voltage Protection 110% ~ 135% ( variable “OVP” follows the adjustable DC output voltage )
Over Load Protection
Current limiting 3 times (1.5”, 3.0”, 5.0”) then intelligent auto recovery
before shutdown
Remote ON / OFF Control Compatible with a TTL signal to turn ON / OFF
Remote Sense Yes
Power Failure Signal Open Collector of NPN Transistor
Parallel Operation Yes
Setup , Rise , Hold Up Time
RESULT A：12.4mS
Temp. Coefficient
±0.04% / ℃ ( 0 ~ 50℃)
Working Temp., Humidity
0℃~+50℃ @100% Load, +65℃ @50% Load, 20% ~ 90% RH
Storage Temp., Humidity
-20℃~+85℃ 10%~95% RH
Vibration 10 ~ 200Hz, 2g 10min./1 Cycle, Period of 60 min. for each axes
Safety Standards UL1950, TUV EN60950
EMC Standards EN55022, EN610000-4-2,3,4,5,6,8,11, EN61000-3-2,3, ENV50204
Leakage Current < 3.5mA / 240V AC
Cooling Power rating & temperature controlled fan
Dimension Weight ; Q’ty /
Carton
291 x 120 x 68 mm (L X W X H) / 2.3 Kgs ; 8 Sets / Ctn
1
TAV-250