Manualshelf

User Manual

ManualsBrandsTechMikeNY ManualsComputers & AccessoriesTechMikeNY High-End PowerEdge R620 Server 2X 2.90Ghz E5-2690 8C 384GB 8X 512GB SSD (Certified Refurbished)
21222324252627282930
29 PowerEdge R620 Technical Guide
Table 17 lists the available Select Network Adapter options and supported features for the R620.
Table 17. Supported Select Network Adapter options and features
Features
Broadcom
5720 Base-T
(default)
Intel I350
Base-T
Broadcom
57800S
SFP+
1
Broadcom
57800S
Base-T
1
Intel X540
Base-T
1
Intel
I350/X520
SFP+
1
Ports x link
speed
4 x 1Gb
4 x 1Gb
2 x 1Gb +
2 x 10Gb
2
2 x 1Gb +
2 x 10Gb
2
2 x 1Gb +
2 x 10Gb
2
2 x 1Gb +
2 x 10Gb
2
Supported
speed
1Gb/s
1Gb/s
1Gb/s and
10Gb/s
1Gb/s and
10Gb/s
1Gb/s and
10Gb/s
1Gb/s and
10Gb/s
SR-IOV
Not
supported
Not
supported
Supported
3
Supported
3
Supported
3
Supported
3
ISCSI HBA
Not
supported
Not
supported
Supported
3
Supported
3
Not
supported
Not
supported
EEE
Supported
Supported
Not
supported
Not
supported
Not
supported
Not
supported
FCoE
Not
supported
Not
supported
Supported
4
Supported
4
Supported
4
Supported
4
Switch
independent
partitioning
Not
supported
Not
supported
Supported
5
Supported
5
Not
supported
Not
supported
DCB
Not
supported
Not
supported
Supported
6
Supported
6
Supported
6
Supported
6
iSCSI TLV
Not
supported
Not
supported
Supported
7
Supported
7
Supported
7
Supported
7
1
These cards have two chipsets that offer the choice of either 10GbE or 1GbE.
2
10Gb NDCs are not supported with an internal GPU or a ¾ length PCIe card.
3
Applies to only 10Gb ports. (For switch independent partitioning support, the maximum number of partitions supported is
four, two partitions per 10Gb port).
System management integration
With R620, the job of deploying, updating, monitoring and maintaining the Select Network Adapters
is fast and easy. System management integration features include the following:
Pre-boot: Using the Dell Lifecycle Controller graphical user interface (GUI) to set configuration
such as bandwidth allocation or firmware revision level
Post-boot: Agent-free out-of-band or high-speed in-band connection over LOM through the
Operating System/BMC pass-thru feature for sensory information
Automation of firmware and driver version deployment upon component replacement
Automatic monitoring of NIC status and notification on SNMP traps
Local or remote re-configuration of any NIC, physical or virtual
PXE boot enabled on all LOM and NDCs for ease of use