Installation Manual

Deleting Custom Signing Certificate

To delete the custom signing certificate using iDRAC7 Web interface:

1. Go to Overview → iDRAC Settings → Network → SSL.

The SSL page is displayed.

2. Under Custom SSL Certificate Signing Certificate, select Delete Custom SSL Certificate Signing Certificate and click

Next.

The custom signing certificate is deleted from iDRAC. iDRAC resets to use the default self-signed SSL certificate

auto-generated by the Web server. iDRAC is not available during reset.

Deleting Custom SSL Certificate Signing Certificate Using RACADM

To delete the custom SSL certificate signing certificate using RACADM, use the sslcertdelete subcommand. For more

information, see the

RACADM Command Line Reference Guide for iDRAC7 and CMC

available at dell.com/support/

manuals.

Configuring Multiple iDRAC7s Using RACADM

You can configure one or more iDRAC7s with identical properties using RACADM. When you query a specific iDRAC7

using its group ID and object ID, RACADM creates the .cfg configuration file from the retrieved information. File name is

user specified. Import the file to other iDRAC7s to identically configure them.

NOTE: Few configuration files contain unique iDRAC7 information (such as the static IP address) that you must

modify before you export the file to other iDRAC7s.

You can also use the system configuration XML file to configure multiple iDRACs using RACADM. System configuration

XML file contains the component configuration information, and this file is used to apply the configuration for BIOS,

iDRAC, RAID, and NIC by importing the file into a target system. For more information, see

XML Configuration Workflow

white paper available at dell.com/support/manuals or at Dell Tech Center.

To configure multiple iDRAC7s using the .cfg file:

1. Query the target iDRAC7 that contains the required configuration using the command: racadm getconfig -f

myfile.cfg

The command requests the iDRAC7 configuration and generates the myfile.cfg file. If required, you can configure

the file with another name.

NOTE: Redirecting the iDRAC7 configuration to a file using getconfig -f is only supported with the local

and remote RACADM interfaces.

NOTE: The generated .cfg file does not contain user passwords.

The getconfig command displays all configuration properties in a group (specified by group name and index) and all

configuration properties for a user by user name.

2. Modify the configuration file using a simple text editor (optional).

NOTE: It is recommended that you edit this file with a simple text editor. The RACADM utility uses an ASCII

text parser. Any formatting confuses the parser, which may corrupt the RACADM database.

3. Use the new configuration file to modify the target iDRAC7 using the command: racadm config -f

myfile.cfg

This loads the information into the other iDRAC7. You can use config subcommand to synchronize the user and

password database with Server Administrator.

4. Reset the target iDRAC7 using the command: racadm racreset