Installation Manual

NOTE: Even if you are a user with read-only privileges, you can filter the alerts.
1. In iDRAC7 Web interface, go to Overview → Server → Alerts . The Alerts page is displayed.
2. Under Alerts Filter section, select one or more of the following categories:
– System Health
– Storage
– Configuration
– Audit
– Updates
– Work Notes
3. Select one or more of the following severity levels:
– Informational
– Warning
– Critical
4. Click Apply.
The Alert Results section displays the results based on the selected category and severity.
Filtering Alerts Using RACADM
To filter the alerts, use the eventfilters command. For more information, see the RACADM Command Line Reference
Guide for iDRAC7 and CMC available at dell.com/support/manuals.
Setting Event Alerts
You can set event alerts such as e-mail alerts, IPMI alerts, SNMP traps, remote system logs, operating system logs, and
WS events to be sent to configured destinations.
Related Links
Enabling or Disabling Alerts
Configuring Email Alert, SNMP Trap, or IPMI Trap Settings
Filtering Alerts
Configuring Remote System Logging
Configuring WS Eventing
Setting Event Alerts Using Web Interface
To set an event alert using the Web interface:
1. Make sure that you have configured the e-mail alert, IPMI alert, SNMP trap settings, and/or remote system log
settings.
2. Go to Overview → Server → Alerts.
The Alerts page is displayed.
157