User Manual

4
www.tlnetworx.com
TL-FO2-HDC2 User Manual
C
HDCP
OFF: No HDMI signal
FLASHING: Non-encrypted video is being received
ON: Encrypted video is being received
D
Link
OFF or FLASHING: Link to the transmitter has not been established
ON: Link to the transmitter has been established
1
12V DC
Connect to the power supply
2
HDMI OUT
Connect to an HDMI display
3
OPTICAL
IN
Connect to the OPTICAL OUT socket on the transmitter via a duplex
multi-mode cable
4
RS232
RS232 control connector
5
IR IN
Connects to a 5V IR receiver (with carrier); signals tranmitted to
the remote receiver
6
IR OUT
Connects to a 5V IR emitter (with carrier); signals tranmitted from
the remote receiver
7
CONTROL
SELECTOR
Switch between IR or RS232 control pass-through
&
Pictures shown in this manual are only for reference.