Information Sheet

TL-FO2-HDC Technical Specifications v181029
www.tlnetworx.com | +1-608-960-7242
Specifications
Transmitter Input/Output
HDMI Input
1 HDMI Receptacle
Optical Output
2 LC Ports via SFP+ Module
IR Input/Output
2 3.5mm TRS Ports
RS232
1 3-pin Removable Terminal Block
12V DC
1 5.5mm OD/2.5mm ID Threaded Barrel Connector
Control Selector
1 2-position Switch
Receiver Input/Output
HDMI Output
1 HDMI Receptacle
Optical Input
2 LC Ports via SFP+ Module
IR Input/Output
2 3.5mm TRS Ports
RS232
1 3-pin Removable Terminal Block
12V DC
1 5.5mm OD/2.5mm ID Threaded Barrel Connector
Control Selector
1 2-position Switch
Supported Audio, Video, and Control
Compatible Video Signals
All SD, HD, and other resolutions up to
- 4K/60 Hz / RGB and 4:4:4 8 bit (HDR)
- 4K/60 Hz / 4:2:2 10 bit (HDR)
- 4K/60 Hz / 4:2:0 10 bit (HDR)
Video Compliance
HDMI 2.0, HDMI 1.4, DVI 2.0 (Pixel clock up to 594 MHz)
Digital Content Protection
HDCP 1.2 / HDCP 2.2 Compatible
Embedded Audio
LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24,
DTS High Res, DTS-HD Master Audio, DSD
Supported RS232 Baud Rates
2400, 4800, 9600, 19200, 38400, 57600, 115200
Supported IR Carrier
33 to 55 kHz
Fiber Optic Transmission Characteristics
Required Cable Type
Duplex OM3
Maximum Bandwidth
10 Gbps
Maximum Distance with Stock SFP+ Modules
300m (984 ft)
Signal Compression
1.8:1 Maximum; Compression starts when video signal >9 Gbps
Chassis and Environmental
Product Construction
Painted aluminum
Product Dimensions (W*H*D)
150 mm (5.91 in) x 20 mm (0.79 in) x 74.4 mm (2.93 in)
Product Operational Chassis Temperature
35 to + 44°C (95 to + 111 °F)
Environmental Operating Temperature
0 to + 45°C (32 to + 113 °F)
Environmental Operating Humidity
10% to 90%, non-condensing
Environmental Storage Temperature
-20 to +70°C (-4 to + 158 °F)
Environmental Storage Humidity
10% to 90%, non-condensing
Power and Regulatory
Power Input
12V DC
Power Supply Input
100-240V AC at 50/60 Hz; 0.5A Max
Power Supply Output
12V DC at 1 A
Maximum Power Consumption
6 watts
ESD Protection
Human-body Model: ±8kV Air-gap discharge and ±4kV Contact discharge
Regulatory Compliance
FCC, CE, RoHS, WEEE
Other
Warranty
Three years
Diagnostic LEDs
Link, Status, HDCP and Power
Included Accessories
IR Receiver (2 ea), IR Transmitter (2 ea), Mounting Ears (4 ea), Rubber
Feet (8 ea), 12V 1A DC Power Supply (2 ea), 3-pin 3.5mm Terminal Block
(2 ea)