User Manual TL-FO-HD 4K Optical Fiber Extender All Rights Reserved Version: TL-FO-HD_160628
TL-FO-HD User Manual Preface Read this user manual carefully before using this product. Pictures shown in this manual is for reference only, different model and specifications are subject to real product. This manual is only for operation instruction only, not for any maintenance usage. Trademarks Product model and its logo are trademarks. Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner.
TL-FO-HD User Manual SAFETY PRECAUTIONS To insure the best from the product, please read all instructions carefully before using the device. Save this manual for further reference. l Unpack the equipment carefully and save the original box and packing material for possible future shipment l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. l Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
TL-FO-HD User Manual Introduction TL-FO-HD is a mini optical fiber extender for 4K resolution. It contains a SOURCE module and a DISPLAY module. Compatible with multi-mode and single-mode fiber, it extends HDMI signals up to 400m/300m via single-mode cable/ multi-mode cable. With its HDMI1.4& HDCP compliance design, the TL-FO-HD supports high definition (up to 4096x2160@30Hz, 1080p 3D) signal.
TL-FO-HD User Manual DISPLAY Module: ① PWR LED: Illuminated when powered ② LINK LED: Illuminated when SOURCE & DISPLAY moduleare connected. ③ USB: Insert a DC 5V 1A power adapter here ④ IN: Connected to the OUT of the SOURCE module Connection: The figure below illustrates a typical connection that can be utilized with TL-FO-HD: Step1. Insert the SOURCE module into the HDMI port of a HDMI source device (e.g. a PC). Step2.
TL-FO-HD User Manual Specification Model SOURCE module DISPLAY module Input Signal 1 HDMI 1 Optical Fiber Input Connector 19-pin Type A male HDMI LC connector Signal Output Output HDMI1.4 Optical Fiber 1 Optical Fiber 1 HDMI Output Connector Signal General Resolution LC connector Optical Fiber 19-pin Type A male HDMI HDMI1.4 Audio Format HDMI Standard Transmission Distance Temperature Reference Humidity Power Supply PCM, Dolby Digital, DTS, DTS-HD Support HDMI1.4 and HDCP1.
TL-FO-HD User Manual Troubleshooting & Maintenance Problems Causes Solutions Color loss or vague/ double Poor quality of the HDMI Change to a high quality image in HDMI display cable (if used) cable.
TL-FO-HD User Manual After-sales Service If there appear some problems when running the device, please check and deal with the problems referring to this user manual. 1) Product Limited Warranty: We warrant that our products will be free from defects in materials and workmanship for three years. Please see warranty page posted on www.tlnetworx.com for more info. Proof of purchase in the form of a bill of sale or receipted invoice must be presented to obtain warranty service.