Operation Manual

- 39 -
Install menu
By pressing
_
/
`
button, select the fourth icon.
Install menu appears on the screen.
Program
By pressing
a
/
b
button, select Program.
Press
_
/
`
button to select the program num-
ber. You can also enter a number via digit but-
tons on the remote control. There are 100 pro-
gram storage between 0 and 99.
Band
Band can be selected either C or S by press-
ing
_
/
`
button.
Channel
Channel can be changed by
_
/
`
button or
Digit Buttons.
Colour System
By pressing
a
/
b
button, select Colour Sys-
tem. Press
_
/
`
button to change the colour
system to PAL, SECAM, PAL60 or AUTO.
If Sound System is set to I, SECAM is not
available for the Colour System.
Note: In EXT mode, you can choose NTSC
3.58 and NTSC 4.43 as well.
Sound System
By pressing
a
/
b
button, select Sound Sys-
tem. Press
_
/
`
button to change the
sound system to BG, DK, I, L or LP.
Fine Tune
By pressing
a
/
b
button, select Fine Tune.
Press
_
/
`
button to adjust the tuning.
Search
By pressing
a
/
b
button, select Search.
Press
_
/
`
button to start program searching.
The searching will stop when a signal is found.
You can also enter a frequency value directly
by pressing the digit buttons.
VCR (Video Cassette Recorder)
 This item can be seen in all modes except
EXT-3 and EXT-5.
 If you want to watch a VCR source from one
of these modes, then it will be better to set
VCR mode on. For this, while the cursor is
on this item press the
_
/
`
buttons to set it
On.
 If you want to watch a DVD , then you must
set this item Off.
Store Program
By pressing
a
/
b
button, select Store Pro-
gram. Press
_
/
`
or OK button to store the
adjustments. Program Stored will be dis-
played on the screen.
Program menu
By pressing
_
/
`
button, select the fifth icon.
Program menu appears on the screen.
02-ENG-37735-1072 UK-37 INCH 17MB15 OEM-(WO VGA)(PIP)(S)-50097076.p65 20.11.2006, 19:4139